XungleeXungleeSpeed

Xunglee / Speed

Internet speed test.

Your connection. Measured, not guessed.

Test server Xunglee Server

Download—Mbps
Upload—Mbps
HTTP latency—ms
Jitter—ms

Ready when you are

—Mbps

Results measure the connection between your browser and this test server. They can differ from other tests depending on network conditions and server capacity.

Your connection may charge for this data. Press GO only when you want to start.

Ready when you are

History on this device

Nothing is saved automatically. Save a result to keep up to 20 tests in this browser. No IP address or identifiers are included.

Your browser

IP ↗

Using this tool with confidence

How to use it

For a useful baseline, pause downloads, cloud backups and streaming on your network. Keep this tab in the foreground. Compare Wi-Fi with a wired connection on the same device when possible; record whether a VPN was active.

Worked example

Download and upload are measured in megabits per second. 80 Mbps corresponds to 10 decimal megabytes per second before protocol and service overhead; it is not a guarantee that a file will download at that rate. HTTP latency and jitter are separate measurements in milliseconds.

Interpretation and limits

This test measures the route to one Xunglee server. Its capacity, distance, shared traffic and the browser can limit the result. Repeat under comparable conditions and compare another measurement service before attributing a low result to your provider. A transfer capped by the test’s byte budget may be too short for a stable high-speed estimate.

Understand your results

Mbps and MB/s

Mbps means millions of bits per second; MB/s means millions of bytes per second. Divide Mbps by 8 for decimal MB/s. Download receives data; upload sends it. These results include HTTP and server overhead.

HTTP latency and jitter

The browser cannot perform ICMP ping here. HTTP latency is the round-trip request time, including server processing. Jitter is the mean absolute difference between consecutive latency samples: sum(|r[i]−r[i−1]|)/(n−1). It is not an ICMP or packet-level jitter measurement.

Why tests differ

Wi-Fi signal, Ethernet, congestion, distance, shared hosting load, PHP capacity, browser CPU and protocol overhead affect the result. Proxies/CDNs, HTTP/2 or HTTP/3, compression, disk spooling and buffering can also change it. This is one server and one route, not a certified line-capacity test.

Download counts received payload bytes using a monotonic clock. Upload counts only bytes acknowledged by the server until its response arrives. Calibration is excluded from speeds but consumes the allowance. Aborted or unacknowledged upload data is not counted in the result.